d a t a sh eet preliminary specification 2002 may 17 discrete semiconductors BGU2003 sige mmic amplifier m3d124
2002 may 17 2 philips semiconductors preliminary specification sige mmic amplifier BGU2003 features ? low current ? very high power gain ? low noise figure ? integrated temperature compensated biasing ? control pin for adjustment bias current ? supply and rf output pin combined. applications ? rf front end ? wideband applications, e.g. analog and digital cellular telephones, cordless telephones (phs, dect, etc.) ? low noise amplifiers ? satellite television tuners (satv) ? high frequency oscillators. description silicon mmic amplifier consisting of an npn double polysilicon transistor with integrated biasing for low voltage applications in a plastic, 4-pin sot343r package. pinning pin description 1gnd 2rf in 3 ctrl (bias current control) 4v s + rf out handbook, halfpage top view mam427 21 4 3 bias circuit ctrl rfin gnd v s +rfout marking code: a6 fig.1 simplified outline (sot343r) and symbol. quick reference data symbol parameter conditions typ. max. unit v s dc supply voltage rf input ac coupled ? 4.5 v i s dc supply current v vs-out = 2.5 v; i ctrl =1ma; rf input ac coupled 10 ? ma msg maximum stable gain v vs-out = 2.5 v; f = 1 800 mhz; t amb =25 c 18 ? db nf noise figure v vs-out = 2.5 v; f = 1 800 mhz; s = opt 1.1 ? db
2002 may 17 3 philips semiconductors preliminary specification sige mmic amplifier BGU2003 limiting values in accordance with the absolute maximum rating system (iec 60134). thermal characteristics characteristics rf input ac coupled; t j =25 c; unless otherwise specified. symbol parameter conditions min. max. unit v s supply voltage rf input ac coupled ? 4.5 v v ctrl voltage on control pin ? 2v i s supply current (dc) forced by dc voltage on rf input or i ctrl ? 30 ma i ctrl control current ? 3ma p tot total power dissipation t s 100 c ? 135 mw t stg storage temperature ? 65 +150 c t j operating junction temperature ? 150 c symbol parameter value unit r th j-s thermal resistance from junction to soldering point 350 k/w symbol parameter conditions min. typ. max. unit i s supply current v vs-out =2.5v; i ctrl = 0.4 ma 2.5 4.5 6.5 ma v vs-out =2.5v; i ctrl =1.0ma 6 10 15 ma msg maximum stable gain v vs-out =2.5v; i vs-out =10ma; f = 900 mhz ? 23 ? db v vs-out =2.5v; i vs-out =10ma; f = 1800 mhz ? 18 ? db | s 21 | 2 insertion power gain v vs-out =2.5v; i vs-out =10ma; f = 900 mhz 18 19 ? db v vs-out =2.5v; i vs-out =10ma; f = 1800 mhz 13 14 ? db s 12 isolation v vs-out =2.5v; i vs-out =0; f = 900 mhz ? 26 ? db v vs-out =2.5v; i vs-out =0; f = 1800 mhz ? 20 ? db nf noise figure v vs-out =2.5v; i vs-out =10ma; f = 900 mhz; s = opt ? 1.0 2 db v vs-out =2.5v; i vs-out =10ma; f = 1800 mhz; s = opt ? 1.1 2 db ip3 (out) output intercept point; z s =z l 50 ? v vs-out =2.3v; i vs-out =10ma; f = 900 mhz ? 19 ? dbm v vs-out =2.3v; i vs-out =10ma; f = 1800 mhz ? 21 ? dbm
2002 may 17 4 philips semiconductors preliminary specification sige mmic amplifier BGU2003 handbook, halfpage mgs536 100 pf r1 c c rf in r ctrl v ctrl rf out v s 1 4 3 2 bga2003 l1 fig.2 typical application circuit. handbook, halfpage 0 50 100 200 200 150 50 0 100 mgs537 150 t s ( c) p tot (mw) fig.3 power derating. handbook, halfpage 0 0.5 1 2 2.5 0 2 mgs538 1.5 1.5 1 0.5 v ctrl (v) i ctrl (ma) fig.4 control current as a function of the control voltage on pin 3; typical values. handbook, halfpage 0 2.5 30 0 10 20 mgs539 0.5 1 1.5 2 i vs-out (ma) i ctrl (ma) fig.5 bias current as a function of the control current; typical values. v s-out =2.5v.
2002 may 17 5 philips semiconductors preliminary specification sige mmic amplifier BGU2003 scattering parameters: v s =2.5v; i s =10ma; t amb =25 c noise parameters: v s =2.5v; i s =10ma; t amb =25 c f (mhz) s 11 s 21 s 12 s 22 magnitude (ratio) angle (deg) magnitude (ratio) angle (deg) magnitude (ratio) angle (deg) magnitude (ratio) angle (deg) 100 0.837 ? 10.6 19.216 163.9 0.007 77.3 0.976 ? 7.1 200 0.783 ? 19.9 17.589 151.7 0.012 77.2 0.920 ? 13.2 300 0.713 ? 28.4 16.321 142.4 0.018 76.7 0.861 ? 17.1 400 0.645 ? 36.0 15.046 134.5 0.022 72.9 0.805 ? 19.8 500 0.581 ? 42.0 13.701 127.7 0.027 75.2 0.759 ? 21.9 600 0.519 ? 47.1 12.709 121.6 0.031 74.8 0.718 ? 22.8 700 0.474 ? 50.8 11.602 116.8 0.034 75.0 0.689 ? 23.4 800 0.433 ? 53.3 10.631 112.6 0.038 75.3 0.664 ? 24.1 900 0.397 ? 55.2 9.791 108.8 0.042 76.3 0.644 ? 24.4 1000 0.369 ? 56.9 8.951 106.0 0.046 76.1 0.627 ? 25.2 1100 0.342 ? 58.4 8.314 103.6 0.050 77.3 0.610 ? 25.6 1200 0.320 ? 60.2 7.730 101.1 0.055 77.6 0.599 ? 26.4 1300 0.301 ? 62.1 7.275 99.4 0.058 78.4 0.591 ? 27.2 1400 0.286 ? 64.4 6.912 97.1 0.063 78.1 0.583 ? 28.0 1500 0.273 ? 66.7 6.493 94.8 0.066 78.2 0.578 ? 28.6 1600 0.262 ? 68.5 6.078 93.5 0.071 78.9 0.572 ? 29.0 1700 0.252 ? 7.08 5.783 91.8 0.074 78.9 0.564 ? 29.6 1800 0.241 ? 73.7 5.475 90.9 0.078 79.8 0.553 ? 30.0 1900 0.229 ? 77.0 5.289 89.9 0.083 79.7 0.543 ? 30.7 2000 0.221 ? 81.1 5.094 88.4 0.088 79.5 0.530 ? 31.9 2100 0.216 ? 85.5 4.911 87.2 0.092 79.4 0.518 ? 33.6 2200 0.215 ? 88.9 4.779 85.6 0.098 79.6 0.512 ? 35.6 2300 0.229 ? 91.6 4.588 84.3 0.104 78.7 0.515 ? 38.2 2400 0.237 ? 97.0 4.446 83.8 0.107 78.6 0.515 ? 40.7 2500 0.240 ? 99.3 4.325 82.3 0.111 79.1 0.523 ? 42.3 2600 0.243 ? 101.1 4.145 81.9 0.115 80.1 0.532 ? 43.0 2700 0.243 ? 102.9 4.105 81.6 0.121 80.4 0.537 ? 43.3 2800 0.238 ? 104.9 4.038 80.2 0.124 80.4 0.538 ? 43.0 2900 0.233 ? 106.8 3.924 78.5 0.129 80.3 0.532 ? 43.2 3000 0.224 ? 109.0 3.795 76.7 0.132 80.0 0.519 ? 43.1 f (mhz) nf min (db) gamma opt. r n / 50 ? magnitude (ratio) angle (deg) 900 1.0 0.19 14 0.16 1800 1.1 0.08 60 0.14 2500 1.3 0.07 90 0.14
2002 may 17 6 philips semiconductors preliminary specification sige mmic amplifier BGU2003 package outline references outline version european projection issue date iec jedec eiaj sot343r d a a 1 l p q detail x c h e e v m a a b 012 mm scale x 21 4 3 plastic surface mounted package; reverse pinning; 4 leads sot343r w m b 97-05-21 b p unit a 1 max b p cd e b 1 h e l p qw v mm 0.1 1.1 0.8 0.4 0.3 0.25 0.10 0.7 0.5 2.2 1.8 1.35 1.15 e 2.2 2.0 1.3 e 1 0.2 y 0.1 0.2 1.15 dimensions (mm are the original dimensions) 0.45 0.15 0.23 0.13 e 1 a e y b 1
2002 may 17 7 philips semiconductors preliminary specification sige mmic amplifier BGU2003 data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. data sheet status (1) product status (2) definitions objective data development this data sheet contains data from the objective specification for product development. philips semiconductors reserves the right to change the specification in any manner without notice. preliminary data qualification this data sheet contains data from the preliminary specification. supplementary data will be published at a later date. philips semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. product data production this data sheet contains data from the product specification. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. changes will be communicated according to the customer product/process change notification (cpcn) procedure snw-sq-650a. definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
? koninklijke philips electronics n.v. 2001 sca73 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reli able and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors ? a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com .fax: +31 40 27 24825 for sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands 125006/04/pp 8 date of release: 2002 may 17 document order number: 9397 750 09849
|
